Snobeeler Posted January 3, 2019 Report Share Posted January 3, 2019 Jack, Good thing you saw the Temp light, could have been way worse. Not to jinx myself but I have not used any studs in over 10 years. Quote Link to comment Share on other sites More sharing options...
revct1 Posted January 5, 2019 Author Report Share Posted January 5, 2019 Hello to Everyone, First - Thanks to the GutZ brothers for giving me a hand getting me and the Renegade safely back to the truck. Next - We trucked home Thursday. The transmission control module fixed the truck transmission problem we had on the way up. The Allison transmission is shifting fine again. The Renegade is at the SkiDoo dealer. A 1.6" Ice Cobra is on order. No more big studs for us. Reading all the posts, I see a lot of riders have already switched to the pre-studded tracks. The dealer is going to have the sled ready this week if all goes well. He said he may be able to get the heat exchanger welded instead of replacing it. Now it is time to get some end of the year work done for the businesses and do the laundry for our next trip. Hope to see you on the trail. Jack & Sandi MrGutz, Phil 1, nyskidooerinnewhampshire and 2 others 5 Quote Link to comment Share on other sites More sharing options...
mikerider Posted January 5, 2019 Report Share Posted January 5, 2019 I already miss the morning 'Jack and Sandi story' to go along with the morning coffee. I thought sure you would be on a new 900 Turbo upon your return. Hope to see you ar RDL. mike PLAYHARD 1 Quote Link to comment Share on other sites More sharing options...
viper2 Posted January 5, 2019 Report Share Posted January 5, 2019 3 hours ago, revct1 said: Hello to Everyone, First - Thanks to the GutZ brothers for giving me a hand getting me and the Renegade safely back to the truck. Next - We trucked home Thursday. The transmission control module fixed the truck transmission problem we had on the way up. The Allison transmission is shifting fine again. The Renegade is at the SkiDoo dealer. A 1.6" Ice Cobra is on order. No more big studs for us. Reading all the posts, I see a lot of riders have already switched to the pre-studded tracks. The dealer is going to have the sled ready this week if all goes well. He said he may be able to get the heat exchanger welded instead of replacing it. Now it is time to get some end of the year work done for the businesses and do the laundry for our next trip. Hope to see you on the trail. Jack & Sandi if your going to sell it anyway just get out the JB weld Quote Link to comment Share on other sites More sharing options...
Shore1066 Posted January 5, 2019 Report Share Posted January 5, 2019 If your going to use JB weld try that old black stuff with pellets in it. Stop leak I think it was called. Lol. I used a lot of it when I was a kid in junk cars. Quote Link to comment Share on other sites More sharing options...
MrGutz Posted January 5, 2019 Report Share Posted January 5, 2019 6 hours ago, revct1 said: Hello to Everyone, First - Thanks to the GutZ brothers for giving me a hand getting me and the Renegade safely back to the truck. Next - We trucked home Thursday. The transmission control module fixed the truck transmission problem we had on the way up. The Allison transmission is shifting fine again. The Renegade is at the SkiDoo dealer. A 1.6" Ice Cobra is on order. No more big studs for us. Reading all the posts, I see a lot of riders have already switched to the pre-studded tracks. The dealer is going to have the sled ready this week if all goes well. He said he may be able to get the heat exchanger welded instead of replacing it. Now it is time to get some end of the year work done for the businesses and do the laundry for our next trip. Hope to see you on the trail. Jack & Sandi Now we need an eval of the 1.6 Ice Cobra! GutZ Quote Link to comment Share on other sites More sharing options...
revct1 Posted January 7, 2019 Author Report Share Posted January 7, 2019 Hi Mike. Sandi is back on a two stroke. Actually she has been riding the 850. She said the 600R isn't broken in yet so the fat guy, me, gets to ride it to soften it up. More french fries please! 😁 Hi Viper & Shore. We are replacing it in the spring but we still have a few more rides this season. Whatever the dealer thinks is best for the repair. I don't want to call the GutZ shuttle service if I don't have to. It was a tough two up ride! One of my riding buddies suggested the 1.6" Cobra. The price is almost the same as the 1.325". He said that it should give a lot more bite than the 1.325" and not much more noise or vibration than the studs. Report to follow. The 850 should be up and running for this weekend. RDL is in our sights. Jack & Sandi Quote Link to comment Share on other sites More sharing options...
MrGutz Posted January 7, 2019 Report Share Posted January 7, 2019 If you give me a little heads up first, I have the 2 up seat for the 1200. GutZ Tow Service, "Dead or Alive, you're coming with me!" I know we need to work on the slogan, but you get the idea. GutZ Florida Snowman, 182ray, PLAYHARD and 1 other 1 3 Quote Link to comment Share on other sites More sharing options...
SnomoGary Posted January 7, 2019 Report Share Posted January 7, 2019 1 hour ago, MrGutz said: If you give me a little heads up first, I have the 2 up seat for the 1200. GutZ Tow Service, "Dead or Alive, you're coming with me!" I know we need to work on the slogan, but you get the idea. GutZ No job to big or to small..... lol MrGutz and MichiganRev 2 Quote Link to comment Share on other sites More sharing options...
MrGutz Posted January 7, 2019 Report Share Posted January 7, 2019 No Job Too Big, No Fee Too Big!! GutZ PLAYHARD, SnomoGary and MichiganRev 3 Quote Link to comment Share on other sites More sharing options...
GSX800 Posted January 7, 2019 Report Share Posted January 7, 2019 Drinks and Dinner, no one rides for free! Of course there were other versions back in the 70's, but this is a family friendly site. MrGutz, PLAYHARD, 182ray and 1 other 2 2 Quote Link to comment Share on other sites More sharing options...
revct1 Posted January 7, 2019 Author Report Share Posted January 7, 2019 6 hours ago, MrGutz said: If you give me a little heads up first, I have the 2 up seat for the 1200. GutZ Tow Service, "Dead or Alive, you're coming with me!" I know we need to work on the slogan, but you get the idea. GutZ If I new ahead of time, I would have taken the 600R! But then I would have missed that oh so memorable ride. I hated to get off the sled at the Delta or should I say I couldn't get off the sled. The old bones didn't want to move at that point. Jack & Sandi's in the hotel Quote Link to comment Share on other sites More sharing options...
MrGutz Posted January 7, 2019 Report Share Posted January 7, 2019 1 minute ago, revct1 said: Don't forget the foot pegs for Mini digging into your legs!! GutZ SnomoGary 1 Quote Link to comment Share on other sites More sharing options...
revct1 Posted January 7, 2019 Author Report Share Posted January 7, 2019 I was wondering what those bars were. I thought that was either to hoist the machine up to work on it or tie it down in the trailer! Jack & Sandi SnomoGary 1 Quote Link to comment Share on other sites More sharing options...
MrGutz Posted January 7, 2019 Report Share Posted January 7, 2019 6 minutes ago, revct1 said: I was wondering what those bars were. I thought that was either to hoist the machine up to work on it or tie it down in the trailer! Jack & Sandi LOL, Forgot they were there until we were loading in to the trailer. I added them so his feet wouldn't dangle from the 2-Up Seat. Sorry GutZ SnomoGary 1 Quote Link to comment Share on other sites More sharing options...
182ray Posted January 8, 2019 Report Share Posted January 8, 2019 6 hours ago, MrGutz said: No Job Too Big, No Fee Too Big!! GutZ Do you supply a wig for male riders to wear 🤣 SnomoGary and GT Rider 2 Quote Link to comment Share on other sites More sharing options...
MrGutz Posted January 8, 2019 Report Share Posted January 8, 2019 Of course, full service! I also serve snacks and a meal on trips longer than 2hrs or 70 miles, Coffee every 20-30 miles. GutZ SnomoGary, PLAYHARD, dooright and 1 other 1 3 Quote Link to comment Share on other sites More sharing options...
SnomoGary Posted January 8, 2019 Report Share Posted January 8, 2019 Don, did Jack have his arms around you hugging your back, and did he look worried as you came through the pickle park..... 😂😂😂😂😂 revct1 and 182ray 2 Quote Link to comment Share on other sites More sharing options...
Mid Range Posted January 8, 2019 Report Share Posted January 8, 2019 Jack......do you know if the trail in red is still closed. Quote Link to comment Share on other sites More sharing options...
MrGutz Posted January 8, 2019 Report Share Posted January 8, 2019 It was last week, there is a new reroute, as you can see, its a little longer but nice. Warning!! Several stop signs are in the reroute for skiers and hikers. GutZ Quote Link to comment Share on other sites More sharing options...
Mid Range Posted January 8, 2019 Report Share Posted January 8, 2019 1 hour ago, MrGutz said: It was last week, there is a new reroute, as you can see, its a little longer but nice. Warning!! Several stop signs are in the reroute for skiers and hikers. GutZ thanks Quote Link to comment Share on other sites More sharing options...
neksledr Posted January 8, 2019 Report Share Posted January 8, 2019 Jack and Sandi- Looks like it was a great shake down trip for the both of you! In my opinion you will not miss the push through studs at all when you get used to the ice ripper / cobra track option. Definitely does not give you the hook up on ice that you're probably accustomed to, but has just enough bite to give you some extra traction when you need it. I also find that you can swing the tail through the corners when you want to have a little extra fun! Hope to see you guys on the trails soon, have fun the next run in RDL. Sounds like the Mayor will be in house so the vino will be flowing! Quote Link to comment Share on other sites More sharing options...
revct1 Posted January 8, 2019 Author Report Share Posted January 8, 2019 Hi Ray. Don said I didn't need a wig as long as I kept my helmet on. Hi GutZ. I'm expecting at least a coffee. The ride was over 20 miles. I wasn't smoking after the event but the sled sure was. Hi Gary. GutZ is the one that should have been worried. I was, how do I say this, behind GutZ? No. In the rear No. That sounds bad too. Maybe I was second on the seat? Oh that is worse! Well two up is an experience. No we didn't have to stop in pickle park! Jack & Sandi Florida Snowman and SnomoGary 2 Quote Link to comment Share on other sites More sharing options...
revct1 Posted January 8, 2019 Author Report Share Posted January 8, 2019 Hi MidRange, Yes that old section of 83 is gone. The replacement trail is easy to follow. A walking trail crosses it in many places so the club is trying to keep the sled speed low. It may add a few miles to your route depending on which way you are traveling. Jack & Sandi Quote Link to comment Share on other sites More sharing options...
revct1 Posted January 8, 2019 Author Report Share Posted January 8, 2019 Hi NekSldr, I don't mind giving up a little traction if I gain not having to replace heat exchangers and riding two up. Luckily the break down wasn't way off in the wilderness. We are looking forward to the RDL trip. Hope to see a few QR folks along with Mike. Jack & Sandi Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.