Jump to content

Looks like we're back crossing on the dam ?


dooright
 Share

Recommended Posts

Yes I confirm, they closed the bridge for safety issue. Here is what the snowmobile club published on Facebook about that:

Following a thorough inspection, we made the decision to completely close the Mattawin Bridge. The bridge is not safe enough.
You will have to borrow the bull dam Taureau. The change has been reported to the federation and will be visible on your snowmobile app(imotoneige).

🔐

 

And yes the crossing on the dam Is ok now it have been reworked, the central section is wider and pretty straight on the west side. 

 

Edited by towing
Link to comment
Share on other sites

2 hours ago, towing said:

Yes I confirm, they closed the bridge for safety issue. Here is what the snowmobile club published on Facebook about that:

Following a thorough inspection, we made the decision to completely close the Mattawin Bridge. The bridge is not safe enough.
You will have to borrow the bull dam Taureau. The change has been reported to the federation and will be visible on your snowmobile app(imotoneige).

🔐

 

And yes the crossing on the dam Is ok now it have been reworked, the central section is wider and pretty straight on the west side. 

 

Figured it had to be some sort of safety issue.

Either way ride the trails as they are presented and make some memories!!!!!!!

Link to comment
Share on other sites

That bridge always seems too low to the water to be able to handle floods and ice buildups...  Was a nice bridge and only like 5 years old, hopefully they get it fixed up to avoid the dam crossing...

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...