JBlavl
-
Posts
134 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Events
Posts posted by JBlavl
-
-
I'm heading for the Casino tomorrow then up 3 across the ferry before heading up to Mont Valin. I will give an update when I get back on how much snow there is from Casino heading up 3.
Posts by Quebec Bob and Sno Horse suggests that Cote Nord has more snow than they know what to do with.
-
I have not called anyone yet. I noticed their website prices are higher than those listed on priceline and sites of the like.
-
On 2/23/2018 at 11:51 AM, Munson said:
We are looking to drive straight north from Syracuse NY in a week or two for 3-4 days of riding.
Given current conditions, how far north do we need to drive to find rideable snow? We stayed in Maniwaki two years ago but I understand we need to go further north than that.
Would also appreciate any suggestions on 150 - 200 mile loops and back pack trip options.
If I should post this in one of the sub forums please let me know which one.
Thanks
A report from Timberman on Friday suggested that if you are heading north to the Mont Laurier area don't get off the black trail till Sainte Anne du Lac.
-
Starting at Drakkar on Wed night then heading for the Casino then the Delta and back to Drakkar on a 3 day loop. Already book at Drakkar both start and finish days. Figure small place and want to get the place I want. They have a reasonable cancellation policy (24hr). When I went to book at both the casino and delta it was either pay up front, non refundable for lowest fare, or pay a little more for no fee cancellation. But fine print says only no fee cancellation up to 48 hours in advance. So question is are these places large enough that I shouldn't have a problem getting a room if I call at lunch day of our ride there? Casino will be a Thursday night, Delta will be a Friday night. I'd hate to book ahead and have weather or a break down etc change plans and still get boned with a room I don't use. Also don't want to not book then get stuck without a room because of a hockey tourney or something.
-
On 2/20/2018 at 10:24 AM, Revxman68 said:
Question on a 3 day pass, do they mark down the time like Maine does?
Reason being if I buy a pass upon my arrival at 2pm it allows you to ride that afternoon, 2 full days and up until 2pm the last day the it expires.
Please let me know as we are planning a trip.
Thank you,
They've never put the time on the 3 day passes I've got the last couple years. Just the date you want to start riding and the date you finish.
-
1 hour ago, PLAYHARD said:
Yeah, just watch out for those sneaky little red solo cups.
I have a couple bottles of that Maple Whiskey at home. I better drink one before I head up to get good an acclimated!
-
Just booked with Reggie for the 28th and 3rd. Doing a loop up to the Casino the Delta and back. Sounded like a nice guy on the phone.
-
Hope you bundled up this morning. Thats -24F (-31C)
-
-
12 minutes ago, stupe said:
I try to keep it under 225 because the group sometimes grows to 10+ guys. 175 - 200 would be ideal. But if the trails are fast, then 250 is do-able. Is Maniwaki a good launching point? I've been up through Mont-Laurier and up 13 but never West of that so I'm not familiar with hotels.
Auberge Du Draveur is a fine starting point in Maniwaki. No point in driving farther than necessary. From Lake George you are about a 6 hour drive from there. You may want to check and see what conditions are like in the area if you are thinking about going soon. I know they just had a storm come through earlier this week but up until then I had not seen a lot of grooming activity in the area.
-
Domaine L'Ombre du Vent is in Parent and it's a great place to stay. Very nice. Very clean. Sleeps 5 or more easily. Price is very attractive. Beds are rock hard but other than that I can't complain about a thing. See pictures attached.
http://www.ombreduvent.com/home.html
Food around Parent? eh. Not a lot of choices for a fine dining meal but you can find something at Hotel Central right in town that'll fill your belly.
I did the exact same loop you are thinking about doing 2 years ago. Did it in 3 days. If you wanted to break it up more I think Pourvoirie Fer A Cheval looked like a decent place to stay. I heard Hotel Tamarac in Clova may be open again, the school house in Clova I also heard is nice. And I've heard Pavillon La Verendrye is an ok place to stay. When I was there it didn't look like much for sleeping accommodations but I didn't stay so don't take my word on it.
Good luck and have fun. It's an awesome loop that'll take you out in the middle of god's country!
-
6 hours ago, Fozzy said:
It's not the first time I hear of dealers pulling parts from their showroom sleds in Quebec. Impressive. I think you would have a hard time finding a dealer to do that in Ontario.
I've heard this of Quebec dealers too. Amazing. That happened here and you pulled into my dealer like that you'd be waiting a week just for them to confirm the problem.
-
You have a website for this webcam you speak of?
-
GFS says it's going to be wet Friday.
Canadian Model says it's going to be wet as well:
The Euro also shows precipitation:
And it shows that it's going to be above freezing:
These all seem to be in pretty good agreement for Friday but I would bet they change before Friday comes. That's a long ways out for a storm this complex.
-
If you get cold put one of these on under your jacket. Turn on and off as desired. https://www.milwaukeetool.com/heated-gear
-
Another not Quebec pic. But I got my early season fix in Upstate NY. Woke up to some fresh pow pow.
- PLAYHARD, VTrider, Mxzeerider and 1 other
-
4
-
21 hours ago, Shore1066 said:
My only concern would be the engineer that designed the sled put rivets in that area for a reason. If other fasterns would work they would have installed them there. Besides if removing and replacing rivets each year may be a great reason to get yourself a air rivrting tool. A present for you from you. Lol
Engineers are tasked with using the cheapest solution that is practical for the application. Pop rivets on a manufacturing line are installed in seconds and they do the job and cost almost nothing compared to a lot of the other fasteners mentioned here. Serviceability is low on the priority list for the manufacturers.
-
On 12/11/2017 at 4:19 PM, Cos said:
Yes I was thinking of those.... Thanks for the link. Do you think would be strong enough for underneath?
I don't think I would use them on the bottom plastics. They are subject to too much punishment to rely on plastic rivets IMO.
-
Polaris uses these in a lot of applications. They are easy to get on and off and work very well. However on the bottom panels they still use regular rivets.
-
On 12/10/2017 at 7:37 AM, PLAYHARD said:
Sounds like she wanted to wear you like a sombrero and ride you like a rental sled!
Hey I would have gone along for a ride. She wasn't too bad on the eyes.
-
Today's the day. I can feel it!
-
Are you referring to iMotoneige for your phones? I downloaded it last year but it's not showing the groomer delays and says its the 16-17 trail map. Do you need to download a new copy of this app each year?
-
How fancy you looking to get? There is Real Masse. Hotel Central. Motel Du Mon Trinity previously Motel Montagnard. Auberge du lac Taureau. Lots of options.
-
Reggie Strikes Again
in General Discussion
Posted
Didn't even have our gear in the room yet.
My brother Drewski got cut off in this one.