jak Posted January 18, 2019 Report Share Posted January 18, 2019 8 hours ago, sno-traveler said: Jak, P/N 9290040090 THANK YOU! Quote Link to comment Share on other sites More sharing options...
Yeti62 Posted January 18, 2019 Report Share Posted January 18, 2019 Hey Mxzeerider do u happen to know the part number for that updated Shield?? Quote Link to comment Share on other sites More sharing options...
Mxzeerider Posted January 19, 2019 Report Share Posted January 19, 2019 5 hours ago, Yeti62 said: Hey Mxzeerider do u happen to know the part number for that updated Shield?? No i don't, but I'll post it when it shows up Quote Link to comment Share on other sites More sharing options...
NHTOM Posted January 19, 2019 Report Share Posted January 19, 2019 On 1/15/2019 at 9:21 PM, PLAYHARD said: We drilled a batch of BVS2 shields to take the wire out thru the siliconed holes above the sealed heated section to avoid the skinny wires (eventually) breaking in the hinge loop. Great idea. Thats always the weak point. Dont know if any folks on here saw todays temps. Its -18F at 1pm in St Michel, -14f at Shawinigan. Nasty cold. Today is one of those "test your helmet and shield" days that Im glad Im missing. PLAYHARD and SnomoGary 2 Quote Link to comment Share on other sites More sharing options...
gkw Posted January 19, 2019 Report Share Posted January 19, 2019 Rode with mikerider and Joe from RDL to St Pamphile last Thursday. Coldest day of the year. Started off at -10F and droppped to -19F soon when we got in the woods. I had my O2 helmet on high the entire trip. Was a little too warm in the sun at times, but zero fogging. Temp never got above zero. The tinted shield did fog a bit after a stop, but it cleared within 2-3 minutes. Pretty amazing. Joe had his on also and he says it is the best $600 he ever spent! Quote Link to comment Share on other sites More sharing options...
182ray Posted January 21, 2019 Report Share Posted January 21, 2019 They must not have had any test riders that wear glasses. I've worn the helmet for 6 days in temps from +25f to -25f the only way I could keep my glasses from fogging was to crack the shield. I didn't pay $600 to ride around with the shield cracked. The worst $600 I ever spent. Glenngo 1 Quote Link to comment Share on other sites More sharing options...
Yeti62 Posted January 21, 2019 Report Share Posted January 21, 2019 My exact words 182Ray! Apparently nobody wears glasses!!thats why iam back to the BVS2!!!! Quote Link to comment Share on other sites More sharing options...
MrGutz Posted January 21, 2019 Author Report Share Posted January 21, 2019 Ha, what does Ray182 know... Someone should flatten his tires! GutZ 8 hours ago, Yeti62 said: My exact words 182Ray! Apparently nobody wears glasses!!thats why iam back to the BVS2!!!! 182ray 1 Quote Link to comment Share on other sites More sharing options...
PLAYHARD Posted January 21, 2019 Report Share Posted January 21, 2019 9 hours ago, Yeti62 said: My exact words 182Ray! Apparently nobody wears glasses!!thats why iam back to the BVS2!!!! Couldn't find a decent lid years ago, and contacts were no bueno, so (just for snowmobiling) I got Lasik in 2000. SO SO SO happy. Quote Link to comment Share on other sites More sharing options...
NHTOM Posted January 21, 2019 Report Share Posted January 21, 2019 20 minutes ago, PLAYHARD said: Couldn't find a decent lid years ago, and contacts were no bueno, so (just for snowmobiling) I got Lasik in 2000. SO SO SO happy. I got Lasik in Montreal in 2002 for the same reason. I use to wear contacts when I rode, but some days when it was super cold I could actually feel them getting crunchy. Best medical outcome ever. PLAYHARD 1 Quote Link to comment Share on other sites More sharing options...
smclelan Posted January 21, 2019 Report Share Posted January 21, 2019 11 hours ago, 182ray said: They must not have had any test riders that wear glasses. I've worn the helmet for 6 days in temps from +25f to -25f the only way I could keep my glasses from fogging was to crack the shield. I didn't pay $600 to ride around with the shield cracked. The worst $600 I ever spent. I wonder if you should try a new shield before throwing in the towel, maybe you have a defect seal mentioned above. PLAYHARD 1 Quote Link to comment Share on other sites More sharing options...
jak Posted January 21, 2019 Report Share Posted January 21, 2019 29 minutes ago, smclelan said: I wonder if you should try a new shield before throwing in the towel, maybe you have a defect seal mentioned above. Farmerold wears glasses and he didn't have a problem and we rode in -15 temps.. He did say his glasses would fog for 1/2 mile and then clear up and be fine. When I turn the setting on high you can actually feel the heat inside the helmet. PLAYHARD 1 Quote Link to comment Share on other sites More sharing options...
revct1 Posted January 21, 2019 Report Share Posted January 21, 2019 Hi Ray. If that helmet is no good for you, save it and I'll try it on when we are up there. I don't wear glasses. You could have it sold for the right price. Jack & Sandi Quote Link to comment Share on other sites More sharing options...
Florida Snowman Posted January 22, 2019 Report Share Posted January 22, 2019 14 hours ago, revct1 said: You could have it sold for the right price. Hey Jack, What is the current market depreciation on used Oxygen helmets? LOL SnomoGary 1 Quote Link to comment Share on other sites More sharing options...
jimcb1 Posted January 22, 2019 Report Share Posted January 22, 2019 where is the heat comming from how does it work Quote Link to comment Share on other sites More sharing options...
MrGutz Posted January 22, 2019 Author Report Share Posted January 22, 2019 8 hours ago, jimcb1 said: where is the heat comming from how does it work The heat comes from the shield, you have a controller with 3 settings. GutZ Quote Link to comment Share on other sites More sharing options...
jimcb1 Posted January 23, 2019 Report Share Posted January 23, 2019 is there a fan that moves the air around Quote Link to comment Share on other sites More sharing options...
MrGutz Posted January 23, 2019 Author Report Share Posted January 23, 2019 1 hour ago, jimcb1 said: is there a fan that moves the air around No, but there are vents, figure them out BEFORE your ride, drove me crazy first day. GutZ snowdogs 1 Quote Link to comment Share on other sites More sharing options...
gkw Posted January 25, 2019 Report Share Posted January 25, 2019 Mr Gutz - are you sure there isn't some other heat source? It is hard to believe that the shield generates enough heat on its own to make the inside of the helmet that hot on the high setting. Quote Link to comment Share on other sites More sharing options...
182ray Posted January 27, 2019 Report Share Posted January 27, 2019 (edited) On 1/21/2019 at 3:41 PM, MrGutz said: Ha, what does Ray182 know... Someone should flatten his tires! GutZ You must have some good connections you say it...& it's done....godfather...lol Edited January 27, 2019 by 182ray Quote Link to comment Share on other sites More sharing options...
MrGutz Posted February 9, 2019 Author Report Share Posted February 9, 2019 Quick Update! Took the 3 O2s to the Dealer (PLT in Pittsfield, Ma), they knew about the Warranty Bulletin, Ordered 3 new shields, came in with a warranty explanation. Shields are not bad to replace, does take a bit of fiddling. No Rainbows in new shields, no separation out of the box. I'll let you know more once we ride again! Later GutZ Quote Link to comment Share on other sites More sharing options...
Mxzeerider Posted February 9, 2019 Report Share Posted February 9, 2019 12 minutes ago, MrGutz said: Quick Update! Took the 3 O2s to the Dealer (PLT in Pittsfield, Ma), they knew about the Warranty Bulletin, Ordered 3 new shields, came in with a warranty explanation. Shields are not bad to replace, does take a bit of fiddling. No Rainbows in new shields, no separation out of the box. I'll let you know more once we ride again! Later GutZ Do you happen to a picture of new shields? Quote Link to comment Share on other sites More sharing options...
doo4adoo Posted February 9, 2019 Report Share Posted February 9, 2019 1 hour ago, MrGutz said: Quick Update! Took the 3 O2s to the Dealer (PLT in Pittsfield, Ma), they knew about the Warranty Bulletin, Ordered 3 new shields, came in with a warranty explanation. Shields are not bad to replace, does take a bit of fiddling. No Rainbows in new shields, no separation out of the box. I'll let you know more once we ride again! Later GutZ So are these new and improved or just new replacements? I've had no issues yet, famous last words but curious to see if they actually have a fix Thanks Mike Quote Link to comment Share on other sites More sharing options...
Mxzeerider Posted February 9, 2019 Report Share Posted February 9, 2019 This is the new and improved version from 2020 accessory catalog. It has a clear bottom portion as where previous shields weren't. That being said my 3rd shield is on back order Quote Link to comment Share on other sites More sharing options...
smclelan Posted February 9, 2019 Report Share Posted February 9, 2019 I just replaced the power cord yesterday, and replaced the shield after my first trip. The helmet worked very well today. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.